Livoo TES253 Notice D'utilisation page 9

blue. Carefully observe the maximum charging voltage of the device (5V) to avoid damage to the
device. Do not use the device during charging.
Connexion Bluetooth
Press and hold the button
sound.
Double-click on Vol -
activation. Activate the Bluetooth settings on your mobile phone and search for TES253.
When pairing is done, your mobile phone will show that the device is connected and the device will
report "Bluetooth connected". Open the music player on your device and play music.
Note: Bluetooth devices can only be paired individually, so be sure to disconnect the previous Bluetooth
device when connecting a new device.
How to use:
Gently place the mask on your face. Adjust the length of the Velcro for optimum comfort. Adjust the nose
pad to keep the light out. Position the headphones at ear level. Slide the headphones into the headgear
case to adjust their position.
Operating instruction
Press the PLAY / STOP button
Press Vol- to listen to the previous song or return to the beginning of the current song.
Press Vol+ to play the next song.
Long press Vol- to reduce the volume.
Long press Vol+ to increase the volume.
Double click Vol -
fountain, submergence, rain, beach, Japanese fountain) or Bluetooth mode.
Timer & automatic turn off (only avaivable in bluetooth music mode and sleep sounds mode).
Double-click the Vol+ button
Double-click the Vol+ button
hours.
Double-click the Vol+ button
Each time the appliance is switched on, it will operate normally. If the last programmed time has not
been completed, the appliance will automatically switch off according to the last programmed time.
Bluetooth hands-free calling
Incoming call: press PLAY / STOP button to answer the phone.
Outgoing call: press and hold the PLAY / STOP button
2 seconds to reject the call.
Double click the PLAY / STOP button
Washing instructions
Before cleaning the device, unplug it if you're loading it and carefully remove the earphones and
electronics box without pulling on the cables.
You can now wash your mask according to the washing instructions above (delicate 30°C).
When your mask is dry, you can carefully replace the headphones and electronics.
until the blue light flashes. The device automatically plays a standby
to switch on the Bluetooth mode. The device signals "Bluetooth mode" upon
once to play. press again to stop.
to choose one of the 10 pre-recorded sounds (music, white noise, fire, jungle, ocean,
once and the device will automatically switch off after one hour.
a second time and the appliance will automatically switch off after two
a third time to stop the timer function.
to redial the last number.
for 3 seconds to power off the appliance, press
www.livoo.fr