PiC indolor Classic Check Manuel D'utilisation page 19

Measurement Procedures
Press the ON/OFF/START Key.
1. All digits will light up, checking the display functions. The checking procedure will be completed in few
seconds.
2. After all symbols appear, the display will show a blinking "0". The monitor is "Ready to Measure" and
will automatically inflate the cuff slowly to start measurement.
Cuff tube
Main artery
3. When the measurement has finished, the armband
deflates. Systolic pressure, diastolic pressure and
pulse will be shown simultaneously on the LCD
screen. The measurement is then automatically
stored into the pre-designated memory zone. This
monitor will reinflate automatically if the system
detects that the cuff needs to be inflated more to
measure your blood pressure.
All manuals and user guides at all-guides.com
19