EINHELL 4257796 Mode D'emploi page 10

or Rechargeable (Nickel Cadmium, Nickel
Metal Hydride, or Lithium-Ion) batteries.
6. Do not dispose of batteries in fi re.
7. Batteries should be recycled or disposed of
as per state, provincial and local guidelines.
When shipping or disposing of batteries and
cordless tools, always ensure that they are
packed individually in plastic bags to prevent
short circuits and fi res.
Safety information for staplers/nailers
•
Always assume that the tool contains
fasteners. Careless handling of the tacker
can result in unexpected firing of fasteners
and personal injury.
•
Do not point the tool towards yourself or
anyone nearby. Unexpected triggering will
discharge the fastener causing an injury.
•
Do not actuate the tool unless the tool is
placed firmly against the workpiece. If the
tool is not in contact with the workpiece, the
fastener may be deflected away from your
target.
•
Disconnect the tool from the power
source when the fastener jams in the tool.
While removing a jammed fastener, the tacker
may be accidentally activated if it is plugged
in.
•
Use caution while removing a jammed
fastener. The mechanism may be under
compression and the fastener may be
forcefully discharged while attempting to free
a jammed condition.
•
Do not use this tacker for fastening
electrical cables. It is not designed for
electric cable installation and may damage
the insulation of electric cables thereby
causing electric shock or fire hazards.
SAVE THESE INSTRUCTIONS
Anl_FIXETTO_18_50_N_SPK7_USA.indb 10 Anl_FIXETTO_18_50_N_SPK7_USA.indb 10
EN
2. Layout and items supplied
2.1 Layout
1. Trigger lever
2. Magazine release
3. Magazine cover
4. Magazine
5. Level indicator
6. Trigger catch
7. Cover plate (external)
8. Safety lever
9. Depth setting
10. Selector switch for bump / sequential shot
11. Replacement cap
12. Belt clip
13. Battery (not supplied)
14. Push lock button
15. Battery capacity indicator
16. Battery capacity indicator button
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
store where you made your purchase at the latest
within 5 work days after purchasing the article and
upon presentation of a valid bill of purchase.
•
Open the packaging and take out the
equipment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
present).
•
Check to see if all the items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, keep the packaging until the end
of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, plastic sheets and small parts. There is
a risk of choking and suff ocating!
•
Cordless Brad Nailer
•
Replacement cap
•
2" (50 mm) brad nails (500 pcs)
•
Belt clip
•
Original operating instruction with safety
information
- 10 -
12.07.2023 09:05:29 12.07.2023 09:05:29