Blumfeldt Garden Hero Smart Mode D'emploi page 70

EN
70
First use
When you turn it on for the first time, the control panel will ask you to enter a
PIN code. Please remember the PIN code you set. When you press the START
button and close the flap, the robot mower begins a circuit and mows the lawn
randomly.
The first mowing passes
The first few mowing passes will seem random and unfinished. This is normal.
The more often the lawn is mowed, the more even it will become. By setting
zones (see "Zone" section) and mowing in a spiral pattern at a location you
select (see "Spiral mowing" section), this effect can be achieved more quickly.
New season mowing
Between mowing seasons when the robot mower is not operating (during
winter months) the grass can become unkempt and thickets emerge. On new
season setup review mowing pass and address any problem areas.
Status
Standby
Mowing
Spot Mow
Returning
Charging
Charge to work
Emergency stop
Error
Firmware update
Meaning
The robot mower is ready to work.
The robot mower is mowing automatically.
The robot mower is mowing spirally.
The robot mower is going back to station.
The robot mower is charging.
The robot mower is charging and will continue
program when charged.
The robot mower is stopped manually.
The robot mower cannot work.
The firmware is updating.