Trigano Tonnelle gonflable Notice De Montage page 11

BEFORE ASSEMBLY
• Remove all items from the bag and place them on the ground.
ABOUT THE INFLATABLE FRAME
• The frame of the shelter is composed of 2 inflatable beams.
• These inflatable beams are placed in the zipped covers. They are therefore easy to replace.
• The beams are made of polyurethane (TPU), a material which resists wear and its porosity to
air is almost zero.
• To provide efficient protection against bursting, each TPU beam is covered with a high-
resistance protection made of polyethylene. This cover is closed with a zipper.
Sleeve
Cover
ATTENTION
THE 2 PULLS OF THE ZIPPER
ARE ATTACHED TOGETHER
WITH A PLASTIC LINK. THIS
LINK MUST NEVER BE REMO-
VED AS THIS WILL RESULT IN
THE TUBE BURSTING DURING
INFLATION.
Notice Tonnelle gonflable v2.indd 11
Zip
- 11 -
ENGLISH
26/09/2018 09:39