◦ = delicate air flow
◦◦ = medium air flow
◦◦◦ = strong air flow
Air temperature selection button (2A)
EN
Press the air temperature selection button (2A) to select the required
air temperature.
The red LEDs indicate the setting being used.
◦ = low temperature
◦◦ = medium temperature
◦◦◦ = high temperature
To activate the cold air function, keep the button (2A) pressed until
the red lights turn blue.
To deactivate it, keep the button (2A) pressed again until the blue
lights turn red.
Ioniser
This appliance uses an ioniser to keep your hair hydrated while it
is being dried. This function is activated automatically when the
appliance is switched on.
Rotation system
This appliance has a handle that rotates 90° to obtain the best
position during use, and to take up less storage space.
with dust or hair. If it is, switch the appliance off for
a few minutes and clean the filter (1) following the
instructions, then switch it back on.
o n .
MAINTENANCE AND CLEANING
Cleaning the appliance and accessories
Clean the appliance and the accessories with a damp cloth when
needed. Do not use solvents or other aggressive or abrasive
detergents. Otherwise, the surface could be damaged. Check the
intake opening of the appliance regularly and remove all hair and
WARNING! If the appliance suddenly
stops working and all the lights flash
simultaneously, check the suction filter (1)
on the back to make sure it isn't clogged
WARNING!
the appliance from the mains
before cleaning or performing
maintenance.
WARNING! Make sure all cleaned parts
are completely dry before reusing the
appliance.
Always
14
disconnect