HQ Power MON T1 Serie Mode D'emploi page 4

3. General Guidelines
•
Refer to the Velleman
manual.
•
All modifications of the device are forbidden for safety reasons. Damage caused by
user modifications to the device is not covered by the warranty.
•
Only use the device for its intended purpose. Using the device in an unauthorised
way will void the warranty.
•
Damage caused by disregard of certain guidelines in this manual is not covered by
the warranty and the dealer will not accept responsibility for any ensuing defects or
problems.
•
Nor Velleman nv nor its dealers can be held responsible for any damage
(extraordinary, incidental or indirect) – of any nature (financial, physical...) arising
from the possession, use or failure of this product.
•
Keep this manual for future reference.
4. Overview
Refer to the illustrations on page 2 of this manual.
A
B
C
D
1
2
3
4
5. Installation
The car connection should be carried out by a qualified person only.
•
Choose a mounting location, depending on the purpose of the monitor. When used to
connect backing-up or parking camera(s), the driver should have a clear view of the
display. For all other purposes make sure the driver is not distracted by images and/or
sound from the system.
•
Mount the mounting bracket and attach the monitor to the bracket with the screw or
install the monitor in a headrest using the included frame. When choosing the second
option, have the installation done by a qualified person! The dealer will not accept
responsibility for any damage to the car's interior.
•
Connect the monitor [8] with the monitor.
•
Connect a camera/video/DVD... (not incl.) to a video input [1][2]. Connect the sound
output of that device to the audio inputs [3][4].
•
Make sure the engine is switched off.
•
Connect the red +12VDC power cable [5] to the +12VDC power system of the car.
Make sure there is no power on the connection wire (remove fuse).
•
Connect the black ground cable [6] to the car ground.
V. 02 – 08/02/2021
®
Service and Quality Warranty on the last pages of this
display
DOWN ()
MENU
UP ()
yellow RCA
video 1 input (AV1)
yellow RCA
video 2 input (AV2)
red RCA
audio input right
white RCA
audio input left
MONxT1
E
F
G
5
6
7
8
4
IR receiver
video select button (AV1/AV2)
power button
red led
"+" 12 VDC
black lead
"-" GND
blue lead
reverse lamp
8-pin
monitor jack
©Velleman nv