Publicité
Les langues disponibles
Les langues disponibles
Installation (continued)
3
Mounting the fixture
Place the back plate of the fixture body (B)
onto the fixture mounting screws (FF) and
secure it into place by using the lock nuts
(AA) provided.
Caulk the upper 2/3
the fixture body (B).
Leave the bottom 1/3
drainage of any water that may leak into
the enclosure.
4
Assembling the lantern
NOTE: Do not exceed a 60 watt incandescent
light bulb. For more information on the proper
lighting to use, see
www.homedepot.com/lightingfacts.
Attach the finial (C) to the hood (A) by
securing it with the hex nut (D).
Install three 60 watt incandescent light
bulbs in the socket of the fixture body (B).
Use the hood screws (CC) to secure the
hood (A) to the fixture body (B).
rds
of the back plate on
rd
un-caulked for
AA
FF
6
B
D
A
D
B
CC
Publicité
