Publicité
Les langues disponibles
Les langues disponibles
Clear All
All channels are deleted from the channel memory.
1
Select "Channel", then press ▶ or ENTER.
2
Press ▲ or ▼ to select "Add/Delete", then press ▶
or ENTER.
3
Press ▲ or ▼ to select "Clear All", then press ▶ or
ENTER.
CH
Add/Delete
Adding Channel
>>
Add/Delete
>>
Clear All
>>
:Select
ENTER :Set
Checking the digital
signal strength
This TV will allow you to view the digital signal
meter for digital channels.
1
Select "Channel", then press ▶ or ENTER.
2
Press ▲ or ▼ to select "DTV Signal".
3
Press ▶ or ENTER to check the digital signal
strength.
The digital signal strength screen will appear.
If necessary, adjust the direction of the antenna to
obtain the maximum signal strength.
CH
DTV Signal
0
50
Signal Level
NOTE:
•
Signal meter feature is not available for analog
channels.
•
After 240 seconds, DTV Signal screen will return to
normal TV operation automatically.
Labeling channels
Channel label appear with the channel number
display each time you turn on the TV, select a
channel, or press DISPLAY.
You can choose any four characters to identify a
channel.
To create channel labels
1
Select "Channel", then press ▶ or ENTER.
2
Press ▲ or ▼ to select "Ch Label", then press ▶
or ENTER.
The Ch Label menu will appear.
3
Press ◀ or ▶ to select a channel you want to
label, then press ▼.
20
100
CH
Ch Label
Channel Number
15-1
Ch Label
CH-1
Label Clear
>>
4
:Select
:Adjust
Press ◀ or ▶ repeatedly until the character you
want appears in the first space.
CH
Ch Label
Channel Number
15-1
Ch Label
CH-1
Label Clear
>>
:Adjust
ENTER :Set
:Select
The characters rotation as follows:
SPACE
If the character which you desire appears, press
ENTER.
Repeat this step to enter the rest of the characters.
If you would like a blank space in the label name,
you must choose the empty space from the list of
characters.
5
Repeat steps 3-4 for other channel. You can
assign a label to each channel.
6
When you finish inputting the label name, press
EXIT to return to the normal screen.
To clear a Ch Label
After step 3 above, press ▲ or ▼ to select "Label
Clear", then press ▶ or ENTER.
NOTE:
•
The channel labels will be reset after "Automatic
Search" on page 19.
Labeling video inputs
The Video Label feature allows you to label each
input source for your TV.
1
Select "Setup", then press ▶ or ENTER.
2
Press ▲ or ▼ to select "Video Label", then press
▶ or ENTER.
3
Press ▲ or ▼ to select an input which you want to
label.
4
Press ◀ or ▶ to select the desired label for that
input source.
Video Label
Video1
-
Video2
-
Component
-
HDMI1
-
HDMI2
-
PC
-
:Adjust
:Select
– / VCR / DVD / STB / Cable / Satellite / Receiver /
Game / Camcorder / PC / DVI PC / Blu-ray
, () @ / + = -
-
Publicité
