Publicité
Les langues disponibles
Les langues disponibles
General Description
Installing Batteries in the Remote Control
Installing Batteries
1
Use the accessory screwdriver
to remove the four screws of
the battery cover of the remote
controller and open the
battery cover.
2
Insert two 1.5V AAA size
batteries in correct polarity.
Don´t mix old or used
batteries with new ones.
3
Lock the four screws on the
battery box cover of the remote
controller with a screwdriver.
Please keep the screwdriver.
Note:
1) A loading of batteries should be last one year under normal use.
2) If you don't intend to use the remote control for a long period of time, remove batteries to
avoid damage due to leakage.
3) Do not mix old and new batteries or different types.
4) Do not throw batteries into fire or water.
5) The batteries (battery pack or batteries installed) should not be exposed to excessive
heat such as sunshine, fire or the like.
External Connection
Antenna connection
Antenna input impedance of this unit is 75ohm. VHF/UHF 75ohm coaxial cable can be connected to
the antenna jack directly, if the antenna cable is 300ohm parallel flat feeder cable, you need to use
the 300ohm/75ohm converter to connect the antenna cable to the antenna jack.
For details Please refer to the following drawing.
Antennas with 300ohm flat twins Leads
Use a 75ohm - 300ohm converter
ANT IN
300ohm coaxial cable
Antenna feeder
8
2 x size
Point the remote towards the
AAA 1.5V
remote control sensor of the
wireless TV and use it within 7
meters.
Put the used batteries into the
recyc-ling bin since it can
negatively affect the
environment.
Antennas with 75ohm Round Leads
75ohm coaxial cable
Antenna cable
TV Operation
1. Please connect the TV to the power supply, and the indicator light will be red after power-on.
Press the (power) button on the remote control or TV to turn on the TV.
2. You need to pair the remote control with the TV first. After the code is successful, you can
use the Operate the Bluetooth remote control of the TV.
3.Press ▲/▼ to select the system language and press OK to confirm the language.
4. Press ▲/▼ to set up Google TV which need to sign in google account for Google service,
or basic TV which not need to sign in google account.
9
Publicité
