Topdon V1500 Manuel D'utilisation page 8

1 Power Button
Press the power button to power ON.
Press and hold the power button to turn on the
LED light, then press the button again to toggle
the light between Flashlight, SOS, Strobe, and OFF.
2 Battery Level Indicators
Indicate the charge level of the internal battery of
the jump starter. (The four indicators will flash for
around 10 seconds when an over-temperature is
detected.)
Note: Only jump-starting vehicles when the battery
level of the jump starter is above 50%.
3 Jump-Start Socket
4 Temperature Detector
Temperature detection is used to detect over-
temperatures in the jump starter.
5 USB Type-A Output (5V3A)
6 USB Type-C Input/Output (PD18W)
7 DC Output (Max 16.8V/10A)
8 LED Light
8