Topdon V1500 Manuel D'utilisation page 16

SECTION 8
FAQ
Q How long does it take to fully recharge the
V1500?
A
The time it takes to fully recharge a V1500 varies
depending on the charger used. For example, a
5V/2A charger takes approximately 4.5 hours.
Q Why is the red Error indicator lit up with the
buzzer beeping and the four battery level
indicators flashing after I performed several jump
starts?
A It's possible that the jump starter is overheating
as you have jump-started too frequently in a short
period of time. Please try again in 20 minutes.
Q What is the reason for the DC output going as
high as 16.8V, and is there a risk of damaging my
12V electronic device during charging?
A
The DC output voltage can reach up to 16.8V as it
is consistent with that of the jump starter (ranges
from 13.2 to 16.8V, and increases as the battery level
rises). However, most 12V devices can withstand up
to 18V, so no damage should occur.
16