Publicité
Les langues disponibles
Les langues disponibles
Recharging
Tip: Fully charge the lamp battery prior to first use.
1.
Insert the supplied USB-C cable into a suitable USB port
(e.g. PC, laptop, USB power supply, etc.)
2.
Open the protective cover of the USB-C charging port and insert the cable.
3.
The charging progress can be followed using the charging indicator's 4 LEDs.
4.
When the lamp's battery is fully charged, all 4 of the charging indicator's LEDs light
up continuously.
5.
Now remove the cable and close the protective cover of the charging port again.
Lamp's light levels
The brightness level can be adjusted by pressing the button. 5 levels are available:
Level 1:
Torchlight (auxiliary light) on (100 % brightness)
Level 2:
Inspection light (main light) on (25% brightness)
Level 3:
Inspection light (main light) on (50% brightness)
Level 4:
Inspection light (main light) on (100% brightness)
Level 5:
Off
Tip: If the lamp remains in any mode for more than 5 seconds, the next time the on/off
button is pressed the lamp will switch off.
9
Publicité
