Publicité
improper use.
Please see www.omcan.com/warranty.html for complete info.
WARNING:
The packaging components are classified as normal solid urban waste and can therefore be disposed of
without difficulty.
In any case, for suitable recycling, we suggest disposing of the products separately (differentiated
waste) according to the current norms.
DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!
Model
Horsepower
RPM
Plate Size
Electrical
Weight
Dimensions
Item Number
1. Before use, check that the power supply corresponds to that required by the machine, and that the external
grounded wire is connected properly.
2. Remove the cutting group and wash them with clean water, then reassemble them and screw the latch.
3. Remove skin and bones from the meat to be minced, cut them into pieces that suit the feed size.
4. Feed the pieces into the mincing chamber with the supplied stomping pedestal. Never use your hands.
5. Disassemble and wash all parts that come into contact with meat immediately after use.
Safety and Warranty
Technical Specifications
MG-CN-0012-C
0.7 HP
200
0.2" and 0.3" / 6mm and 8mm
110V/60/1
60 lbs. / 27.2 kgs.
16.25" x 9" x 16.5" / 413 x 229 x 419mm
11046
5
Operation
Publicité
