Pfannenberg DTS 6X2E Mode D'emploi page 81

ENG
Cooling units with a Premium Controller have a connection for the control unit with a green LED light and a control panel. The
connection for the control unit is on the unit cover.
Steady lighting of the green LED light when mains voltage is applied indicates fault-free operating mode. System information is
displayed on the control panel.
The following system information displays are possible:
Control panel
Tab. 4: System information on the control unit
For detailed specifications for the error messages, see "Error messages", Page
Operating Manual | Attachment and Installing Cooling Units X-Series | Premium Controller – 230 V | 086100133
System information
Display – Temperature (°C/°F) of the control sensor in normal operating condition.
Display – Execute stop mode. Door is open.
Alternating display with temperature and stop mode, for fault Er00.
Display: StoP  Er00  Temperature.
Display - Execution of the energy function, is activated in energy-saving mode
Alternating display with temperature display (°C/°F).
Display - Error number when a fault occurs.
In case of a fault, error number (Er01-Er15) alternating with temperature display (°C/°F).
Exception error Er00: StoP  Er00  Temperature.
55.
16/65