Tornador Z-010 Mode D'emploi page 30

1. A = blue Tornador hose wrench size 10
B = housing
C = internal hose wrench size 14
D = switching unit wrench size 16
3. Unscrew and remove the size 16
switching unit (D) from size 14 nut (C)
above it. Brace with a size 14 open-jaw
wrench.
Z-010 Tornador-Gun repair instructions
2. Unscrew and remove the screw
wrench size 10 with the blue Tornador
hose (A) from the housing (B). Remove
any residue from the sealing tape from
the internal thread of the housing.
4. Then unscrew and remove the thread
with the hose from the housing with
wrench size 14.