Publicité
Les langues disponibles
Les langues disponibles
7.7 M. TEMP. SET (pH mode)
7.8 Temp. Comp. (CD mode)
7.9 CD, TDS Select (CD mode)
7.10 % Salt SET (DO Mode)
7.11 Height Value (DO Mode)
7.12 ESC-> Finish
3.
To make advanced Adjustments, use the following buttons:
"ESC", "Enter", " " Up, " " Down, "SET".
7.1 Check Memory Space
To check the free memory, press and hold the SET button for at least 2 seconds. The display
will show
XXXXX
XXXXX is the free memory balance. For example XXXXX=15417.
7.2 Clear Memory
To delete readings from the memory:
•
Push ENTER button twice to confirm.
•
Press the ESC button once to quit, and return to the main measurement display.
7.3 Date/Time Setting
•
Use " " Up, " " Down and "Enter" (->) to et the Date (year-month-date) and the
Time (hour-min-sec).
•
After Date/Time adjustment, push the "Enter" button, then press the "ESC" button
to save the clock data into the memory, and return to the normal display.
7.4 Sample Time Setting
•
Use " " Up, " " Down and "Enter" (->) to select the Sample Time (hour-min-sec).
•
After Sample Time adjustment, push the "Enter" button, then press the "ESC" but-
ton to save the clock data into the memory and return to normal display.
7.5 Auto Power Off Default Setting
•
Use " " Up, " " Down to select " 1 " or " 0 ".
1 = Auto power On.
0 = Auto power Off.
•
After Auto Power Off adjustment, push the "Enter" button, then press "ESC"
save the data and return to the normal display.
AL 15
Memory Space
to
35
Publicité
