Yeelight C2001 Serie Manuel D'utilisation page 4

EN
Mounting Instructions
1. Open the package and take out the ceiling light. Push the lock switch inward and remove the base.
2. Mount the Base
Method A:
Use an impact drill 6 mm in diameter to make
two mounting holes with a length of ≥ 25 mm
in the wall (as shown in the following figure).
Put the expansion tube into the mounting
hole, and then thread the power cord through
the wiring hole. Use self-tapping screws to fix
the base on the ceiling, and verify the base is
securely mounted. (Recommended)
2
*In order to avoid any danger, please
ask an electrical professional to perform
mounting or maintenance.
* Before mounting, make sure to
disconnect the power supply to prevent
electric shock. Mounting should be
Caution, risk of
electric shock
performed in strict accordance with the
instructions. Improper mounting is liable
to cause accidents such as fall, fire, and
electric shock.
Method B:
Check that the two mounting points on the
light box are intact. Then, thread the power
cord through the wiring hole. Use metric
screws to fix the base on the light box on
the ceiling, and verify the base is securely
mounted.