Panasonic CS-E9NKUAW Instructions D'utilisation page 6

REMOTE CONTROL
Maximum distance: 26ft/8m
Remote
Control display
3
6
8
9
12
6
All manuals and user guides at all-guides.com
INDICATOR
(Green)
POWER
(Orange)
TIMER
(Orange)
QUIET
(Orange)
POWERFUL
1
4
2
5
7
11
10
Press the remote control's button
TO TURN ON OR OFF THE UNIT
1
• Please be aware of the OFF indication on the remote
control display to prevent the unit from starting/stopping
improperly.
TO SET TEMPERATURE
2
• Selection range : 60°F ~ 86°F / 16°C ~ 30°C.
• Operating the unit within the recommended temperature
could induce energy saving.
HEAT mode : 68°F ~ 75°F / 20°C ~ 24°C.
COOL mode : 78°F ~ 82°F / 26°C ~ 28°C.
DRY mode : 2°F ~ 4°F / 1°C ~ 2°C lower than room
temperature.
TO SELECT OPERATION MODE
3
AUTO mode - For your convenience
• During operation mode selection the power indicator
blinks.
• Unit selects operation mode every 10 minutes according
to temperature setting and room temperature (For Single
Split System).
• Unit selects operation mode every 3 hours according to
temperature setting, outdoor and room temperature
(For Multi Split System).
HEAT mode - To enjoy warm air
• Unit takes a while to warm up. The power indicator blinks
during this operation.
COOL mode - To enjoy cool air
• Use curtains to screen off sunlight and outdoor heat to
reduce power consumption during cool mode.
DRY mode - To dehumidify the environment
• Unit operates at low fan speed to give a gentle cooling
operation.
TO SELECT FAN SPEED
4
FAN SPEED
• For AUTO, the indoor fan speed is automatically adjusted
according to the operation mode.
TO ADJUST VERTICAL AIRFLOW DIRECTION
5
AIR SWING
• Keeps the room ventilated.
• In COOL/DRY mode, if AUTO is set, the louver swing up/
down automatically.
• In HEAT mode, if AUTO is set, the louver fi x at
predetermined position.