5) Remove the door end cover, install the upper hinge sleeve and door signal
line to the other side and install the door end cover. Dismantle the door stopper,
sleeve pipe from the right bottom of door, insert the sleeve pipe into hinge hole
of left bottom of door, assemble door stopper on left bottom of door.
sleeve pipe
stopper
stopper screw
6) Take out the left top hinge, left top hinge cover from accessories package,
place the door on bottom hinge, and mount left top hinge. Connect signal line
terminal 3 with signal line terminal 2, connect signal line terminal 1 with signal
line terminal 4, mount top hinge cover and hole cover.
③
①
7) For the assembly of the handle, please refer to chapter 2.2.
5)
hinge cover
door signal line
door end cover
④
①
13
sleeve pipe
5)
hole cover
V.2