Publicité
immediately remove the power plug or power adaptor from the socket. If the device is
powered, do not put hands in the water. Have the device checked by the qualified
electrician before using it again.
18. Do not touch the device or power adaptor with wet hands.
19. The device has to be turned off after every use.
20.
Do not leave the unit on to the wall outlet or power supply unit unattended.
21. If the device utilises a power adaptor, do not cover it, because this can cause a
dangerous temperature rise and can damage the device. Always connect the power
adaptor cable to the device, and then connect the power adaptor to the power socket.
22. Keep the device out of the reach of children. Using the devices by children must be
supervised by adults.
23. The power cord should not touch hot parts of the device and should not be located near
other heat sources.
24. Do not wrap electric cable around the device.
25. Do not use a hair curling iron in the bath.
26. Do not remove dust or foreign bodies from the inside of the hair straightener using
sharp objects.
27. Do not use outdoors or where aerosols are being used or where oxygen is being
administered.
28. Do not cover the hair curling iron, it might cause the accumulation of heat in its interior
and it may cause damage or fire.
29. Hairsprays contain flammable materials. Do not apply them while using the device.
30. Do not use the device on people who are sleeping.
31. The device can be supplied only with the voltage specified on the housing.
32. During operation, do not place the device on wet surfaces or clothes.
33. After use, turn off and unplug the unit. Wait until the device cools down before storing.
34.During the operation ceramic plates heat up to high temperatures. Do not touch hot
parts of the hair curling iron and do not allow contact with the skin of the head, because it
may cause burns
35. The device is not designed to work with external schedulers or separate remote control
system.
PRODUCT DESCRIPTION (picture 1):
1.Power indicator light
3. Straightening brush
5. Crimping Plates "ZIG-ZAG"
7. Change Plate Attachment
9. 19 mm Curling Tong
11. Spiral Guide for 19mm curling tong
USING THE DEVICE
Before connecting or removing an attachment, make sure the unit is turned off and that the pieces have cooled down.
To connect an attachment (3) / (7) / (8) / (9), slip it on the metal rod (picture 2) of the handle and press it in firmly until you hear a "click".
To remove an attachment (3) / (7) / (8) / (9), hold the handle and, while pushing the release button (4) on the side of the handle, slowly
pull out the attachment. Never change hot attachments.
To swap an attachment (5) / (6) on the change plate attachment (7), hold them by the cool tip (picture 3. - A) and slide them appropriately
into the housing of the attachment (7). Make sure the superior and inferior plates match together. To extract the plates, hold them by the
cool tip, press on both sides (picture 3. - B) and pull them out of the change plate attachment (7). Never change hot attachments.
2. On/Off Switch
4. Release Button
6. 3D Waveing Plates
8. 32 mm Curling Tong
10. Comb Guide for 19mm curling tong
4
Publicité
