Publicité
Les langues disponibles
Les langues disponibles
1. Assemble the columns
F
O
Q
M
S
2. Attach the ceiling plate to the concrete ceiling
W-A
3
E
45mm
60mm
(1.8")
(2.4")
ø 12mm
(ø 1/2")
U
mark the exact
location of
mounting holes
Drill pilot holes
Insert the expansion bolts into the hole as shown. Once
inserted, remove the washers and hex nuts..
1:1
I
1
2
Installers should verify that the support surface will safely support the combined weight of the equipment
and all attached hardware and components.
Attach the hex nuts to the expansion bolts corresponding to
the keyhole pattern found on the ceiling plate. Do not
overtighten and leave a small space for the ceiling plate to
slide into the slots in the keyhole.
Q
WARNING
4
Publicité
