Publicité
Les langues disponibles
Les langues disponibles
Installation
5
Installation
CAUTION!
Before installation, check that the local distribution conditions (gas
type and pressure) and the settings of the appliance compatible.
The adjustment conditions for this appliance are provided on the
label (or on the data plate).
This appliance is not connected to a combustion product evacuation
system. It must be installed and connected in accordance with
the installation rules in force. Special attention must be given to
relevant ventilation governing provisions.
5.1 Installation hole
CAUTION!
The appliance should be kept away from flammable materials.
This appliance belongs to CLASS 3: APPLIANCE TO BE BUILT INTO A
KITCHEN UNIT OR WORKTOP.
Minimum distances to observe from the walls
Distance
120 mm
From the top edge of the door to the top horizontal wall.
50 mm
From the side edge of the door to the adjacent vertical wall.
Built in hole dimensions
Depending on the model, make a hole in the cabinet as shown in Fig. 2, page
2.
The cabinet must be parallel to and flush with the horizontal worktop.
The cabinet built-in hole must be parallel. If the cabinet has aeration openings,
prevent combustible materials from accessing these openings.
26
FO250SA - FO250FSA - FO252SA - FO252FSA
Position
EN
Publicité
