Panasonic DVD MULTI CF-VDM292U Instructions D'utilisation page 10

Table des Matières

Les langues disponibles

Using the Drive

When writing to discs

Read the instructions on the disc package carefully.

With DVD-RAM, you can write or rewrite as with the hard disk using Explorer, without

using the writing software. (DVD-RAM driver is required. Refer to page 12 on how to

install the software.)

Writing software is required to write data to a disc other than DVD-RAM.

Install "B's Recorder" and "B's CLiP" using "DVD Drive Utility Disc" (included).

(

page 17)

Be sure to use discs conforming to the proper write speeds. (

If the write operation is to involve a long period of time, be sure to connect the AC

adaptor. If the battery power runs low and the power of the computer is cut, the write

operation may end in failure.

Be sure to use discs that meet the following specifications.

DVD-R for General Ver.2.0 (4.7 GB)

DVD-R for General Ver.2.0/4X-SPEED DVD-R REVISION 1.0 (4.7 GB)

DVD-R for General Ver.2.0/8X-SPEED DVD-R REVISION 3.0 (4.7 GB)

DVD-RW Ver.1.1 (4.7 GB)

DVD-RW Ver.1.1/2X-SPEED DVD-RW REVISION 1.0 (4.7 GB)

DVD-RW Ver.1.2/4X-SPEED DVD-RW REVISION 2.0 (4.7 GB)

DVD-RAM Ver.2.0 or Ver.2.1 (4.7 GB/9.4 GB)

DVD-RAM Ver.2.1/3X-SPEED DVD-RAM REVISION 1.0 (4.7 GB/9.4 GB)

DVD-RAM Ver.2.2/5X-SPEED DVD-RAM REVISION 2.0 (4.7 GB/9.4 GB)

+R Ver.1.0, Ver.1.1 or Ver.1.2

+R DL Ver.1.0

+RW Ver.1.1 or Ver.1.2

Depending on the disc, the quality of the write operation may not be so good. We recom-

mend using any of the following discs.

Recommended Discs:

<CD-R>

HITACHI MAXELL, Ltd.