Publicité
Les langues disponibles
Les langues disponibles
∙ Always make sure that the cooking container or plate used does not contain any metal decoration such as a gold rim or
colour containing metal particles. Lead crystal objects are also not suitable. Always make sure that no parts of the cooking
containers used are hollow (e.g. the handles). Porous materials may have absorbed water during cleaning and are again
not suitable. Cooking containers or utensils made of 'Melamine' plastic material absorb energy and are also unsuitable.
Using the microwave function
∙ Containers made from heat-resistant glass or porcelain are particularly suitable for use in microwave appliances.
∙ Plastic is suitable only if it is heat-resistant.
∙ Plastic cooking containers especially designed for use with microwave ovens are available at most kitchenware dealers.
∙ Cooking bags etc. should be punctured to be able to release any high pressure during cooking.
Using the grill or hot-air function
∙ With these functions, any heat-resistant containers or plates suitable for conventional ovens may be used, though not any
plastic items.
∙ The food to be cooked can be put directly on the grill rack or pizza plate, which is then placed on the glass turntable.
Using the microwave/grill or microwave/hot-air combination
∙ When using the combination functions, the microwave and grill or hot-air functions are activated alternately. The
containers or plates must therefore be suitable for use in a microwave appliance as well as being heat-resistant. Because
of the relatively high temperatures, plastic items must not be used. Make sure that the container or plate used does not
contain any metal parts.
Initial setting of the clock
∙ Once the unit has been connected to the power supply, the display shows '1:00' and an acoustic signal is heard.
∙ Turn the rotary control to set the correct hour.
∙ Press the
button briefly. The minute digits are shown.
∙ Turn the rotary control to set the correct minutes.
∙ Press the
button briefly to finish setting the time. ':' flashes in the display and the current time is shown.
∙ The time setting process can be cancelled or skipped by pressing the
∙ After a power failure, the clock must be re-set.
Changing the time
∙ To change the time, press the
∙ Press the
button briefly to change between the 24- or 12 –hour formats.
∙ Turn the rotary control to set the correct hour.
∙ Press the
button briefly. The minute digits are shown.
∙ Turn the rotary control to set the correct minutes.
∙ Press the
button briefly to finish setting the time. ':' flashes in the display and the current time is shown.
Acoustic signal & Childproof safety device
Acoustic signal
∙ When any control button is pressed or the rotary control turned, a correct input is acknowledged by a beep signal.
∙ To cancel the signal, press the
∙ Cancelling the beep signal in this way only affects the use of control buttons or rotary control; the signals indicating
programme sequences will still be active.
∙ To re-activate the signal, press the
Childproof safety device:
∙ This safety device prevents children from operating the appliance without supervision.
∙ To activate the safety device, press
∙ To switch off the safety device, press
∙ Note: Should you experience a problem when switching the appliance on, first verify that the safety device is not
activated.
24
Operation
button for 3 seconds. The display shows Hr 24 or Hr 12.
button briefly.
button again briefly.
for 3 seconds. The indicator
again for 3 seconds. The indicator
key.
appears on the display.
goes out.
Publicité
