Create SPEAKER TABLE Manuel D'utilisation page 9

• When a call comes in, the speaker will broadcast the incoming call's phone number and
the dial tone. Shortly press the Play/Pause/phone button to answer the phone (try to
speak to the MIC so it will be a clear call). Short press again to hang up, and long press
to decline.
• Double press the Play/Pause/phone button for dialing the phone number of the last call
in record.
• Press + button to increase the volume.
• Press - button to decrease the volume.
• When the speaker is powered on, or connected with the AC adapter, the USB ports can
charge an iPhone and an Android mobile phone at the same time (for example). When the
speaker is turned off, the USB port cannot charge any external devices.
• The charging coil of the wireless charging devices (The mobile phone which can support
Qi standard of wireless charging) needs to aim at the wireless charging mark which is in
the middle of the table speaker, when the speaker is powered on or connected with the
AC adapter. You will see the charging mark on the screen of your mobile phone or you will
hear a sound after connecting with the device for wireless charging.
• When the battery capacity is low, you will hear "Low Battery" to remind the user that the
speaker needs to be charged. lf the user does not connect the speaker to charge it, the
speaker will be automatically powered off.
• After connecting the AC adapter to the port on the back of the speaker, the red LED
light will be on while charging. The red LED light will turn off when the speaker is fully
charged.
• Caution: The LED light turns red for one second after connecting the AC adapter. Then,
the LED light will turn off. It means the built-in battery is fully charged.
TWS feature allows you to link two speakers together. The first table will be the master
connected to the Bluetooth device and operate all controls. The second table is a linked
speaker giving True Wireless Sound.
1. Turn on both table speakers, double click the POWER/TWS button on one of the two
table speakers, both speakers will enter team paring mode, you will hear an acoustic
signal, both blue LED indicators of both table speakers will flash rapidly at the same
time. After the team paring, the LED indicator of the first speaker (Master) will remain
flashing slowly. The LED light of the second speaker (Sub-speaker and linked TWS) will
be green. After connecting with a phone or other Bluetooth device, the Master speaker
LED will be fixed blue, the LED light of the sub-speaker will be fixed green.
2. When speakers are team paired successfully, short press POWER/TWS button of the
Master speaker or the sub-speaker to switch off the team pairing TWS mode.
MAKING PHONE CALLS VIA BLUETOOTH
VOLUME CONTROL
USB CHARGING
WIRELESS CHARGING
LOW BATTERY AND CHARGING
TWS FUNCTION
E NG L I SH
9