Publicité
Les langues disponibles
Les langues disponibles
a. POWER ON/POWER OFF
POWER ON: Hold the "POWER" button on the left front panel of receiver till LCD display
"
" and then release it LCD will display "
will display "
POWER OFF: Hold the "POWER" button on the left front panel of receiver till LCD display
"
", receiver unit will powered off and all microphones in standby status when released
the button. If still hold the button, LCD will display "
are powered off at the same time.
a. System function key: There are 3 function keys on receiver unit
b. System mode setting:
System default mode: CFREE-4MAX-FIFO
System support 10 modes setting by receiver unit (FIFO 1/2/3/4, LIMIT 1/2/3/4, CONLY, CFREE),
user can set these modes by UP & DOWN key. System will save and keep the last setting mode in
3 seconds automatically or press SET key to save the mode immediately.
C.ONLY: When chairman microphone priority button was press on, the chairman microphone is
turn on while the delegate microphone being turn off until the priority button is released, or
delegate microphone cannot turn on again.
Mode setting method: Press SET key one or several times till "CFREE" character flashing, press
DOWN, the flashing character will change to CONLY (press UP the flashing character will change
to CFREE), and then press SET to save it or wait about 3 seconds the system will save the mode
automatically, characters will stop flashing.
C.FREE: When chairman microphone priority button was press on, the chairman microphone is
turn on while the delegate microphone being turn off, but delegate microphone can be turned on
again even chairman microphone not released priority button.
Mode setting method: please see C.ONLY setting method
1MAX-LIMIT: System only allowed 1 piece delegate microphone turned on at the same time, if
other delegate microphones want turn on, user should turn off that microphone first.
Number setting method: Press SET key one or several times till "4MAX" character flashing, press
DOWN or UP key till the flashing character change to 1MAX, and then press SET to save it or wait
about 3 seconds the system will save the setting automatically, characters will stop flashing
Mode setting method: Press SET key one or several times till "FIFO" character flashing, press UP
key, the flashing character change to LIMIT (press DOWN the flashing character will change back
to FIFO), and then press SET to save it or wait about 3 seconds the system will save the setting
automatically, characters will stop flashing.
2MAX-LIMIT: System only allowed 2 pieces delegate microphones turned on at the same time, if
other delegate microphones want turn on, user should turn off 1 or 2 microphones first.
Setting method: please see 1MAX-LIMIT setting method
3MAX-LIMIT: System only allowed 3 pieces delegate microphones turned on at the same time, if
other delegate microphones want turn on, user should turn off 1, 2 or 3 microphones first.
Setting method: please see 1MAX-LIMIT setting method
"
DOWN
SET
", after system self-detecting LCD
", both receiver and microphones
UP
15
Publicité
