HoMedics HTD8216C Mode D'emploi page 19

All manuals and user guides at all-guides.com
Guidance and manufacturer's declaration-electromagnetic immunity
The Thermometer is intended for use in the electromagnetic environment specified below. The
customer or the user of the Thermometer should assure that it is used in such an environment.
Immunity test
Electrostatic discharge (ESD)
IEC 61000-4-2
Electrical fast transient/burst
IEC 61000-4-4
Surge IEC 61000-4-5
Voltage dips, short interruptions
and voltage variations on power
supply input lines
IEC 61000-4-11
Voltage interruption
IEC 61000-4-11
Power frequency (50/60 Hz)
magnetic field IEC 61000-4-8
NOTE UT is the a.c. mains voltage prior to application of the test level.
IEC 60601 test level
±8kV contact
±2, ±4, ±8, ±15 kV air
The input a.c. power ports: ±2 KV
The input d.c. power ports: ±2 KV
Signal input/output ports: ±1 KV
Input power ports: +0.5, +1.0 KV
Signal input/output:+2.0 KV
0.5 cycles for > 95% (sync angle
(degrees):0, 45, 90, 135, 180,225,
270, 315)
1 cycles for >95% UT (sync
angle
(degrees):0)
25 (50Hz)/30 (60Hz) cycles for
30% U T (sync angle
(degrees):0)
250 (50Hz)/300 (60Hz) cycles
for >95% UT (sync angle
(degrees):0)
30 A/m
GB | 19
Compliance level
±8kV contact
±2, ±4, ±8, ±15, kV air
Not applicable
Not applicable
Not applicable
30 A/m