Genesis GLGT08B Manuel D'utilisation page 2

SPECIFICATIONS
• Model ........................................................ G LGT08B
• Motor Power ............................................ 8V DC
• No Load Speed ......................................... 1000 RPM
• Battery ..................................................... 8 V, Lithium-Ion, 2000 mAh
• Charger .....................................................120V~/60Hz, 0.4A
• Charging Time .......................................... 3-5 Hours
• Trimming Blade Length ............................. 5"
• Trimming Blade Cutting Capacity .............. 3 /8"
• Shearing Blade Width ............................... 3 "
• Net Weight ................................................ 1.5 lb
Includes: Trimming Blade, Shearing Blade, Battery, Charging Stand, and Charging Adaptor
WArNING:
operator's manual before operating this tool. Save this Manual for future reference.
Toll-Free Help Line: 1-888-552-8665
WeAR YOuR
SAfeTY GLASSeS
fOReSIGHT IS BeTTeR
THAN NO SIGHT
Look for this symbol to point out important safety
precautions. It means attention!!! Your safety is
involved.
GENErAL SAFETY rULES
WArNING:
and other construction activities contains chemicals known to cause cancer, birth
defects or other reproductive harm. Some examples of these chemicals are:
• Lead from lead-based paints.
• Crystalline silica from bricks and cement and other masonry products.
• Arsenic and chromium from chemically treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as
those dust masks that are specially designed to filter out microscopic particles.
WArNING:
instructions before using this equipment. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious personal injury.
2
To reduce the risk of injury, user must read and understand this
WArNING:
objects being thrown into your eyes, which can result in severe eye damage. Before
beginning tool operation, always wear safety goggles or safety glasses with side
shields and a full face shield when needed. We recommend Wide Vision Safety Mask
for use over eyeglasses or standard safety glasses with side shields. Always wear eye
protection which is marked to comply with ANSI Z87.1.
Some dust created by power sanding, sawing, grinding, drilling,
read and understand all warnings, cautions and operating
SAVE THESE INSTRUCTIONS
8V Cordless Garden Trim Kit
Operator's Manual
The Operation of any power tool can result in foreign
GLGT08B