DeLOCK 62686 Mode D'emploi page 3

English
Hardware Installation
1.
Turn off your PC and unplug the power cord.
2. Open the housing.
3. Connect your SATA device to the converter.
4.
Connect an optional IDE cable to the IDE port of the converter
and to a free IDE port of your motherboard.
5. Set the jumper to the required Master / Slave / Cable Select
mode on the converter.
6.
Reattach the housing and connect the power cord to the AC
adapter.
Support Delock
If you have further questions, please contact our customer support
support@delock.de
You can find current product information on our homepage:
www.delock.com
Final clause
Information and data contained in this manual are subject to change
without notice in advance. Errors and misprints excepted.
Copyright
No part of this user manual may be reproduced, or transmitted
for any purpose, regardless in which way or by any means,
electronically or mechanically, without explicit written approval of
Delock.
Edition: 02/2024
-3-