Publicité
Les langues disponibles
Les langues disponibles
ELECTRICAL CONNECTION
NOTE: This is a hybrid product capable of
operating on alternating current (AC) through a
power adapter or direct current (DC) through a
built-in battery pack.
WARNING! Items in the Assembly section
are not assembled to the product by
the manufacturer and require customer
installation. Use of a product that may have
been improperly assembled could result in
serious personal injury.
WARNING! If any parts are damaged or missing,
do not operate this product until the parts are
replaced. Use of this product with damaged or
missing parts could result in serious personal
injury.
WARNING! Do not attempt to modify this
product or create accessories or attachments
not recommended for use with this product.
Any such alteration or modification is misuse
and could result in a hazardous condition
leading to possible serious personal injury.
1.
Insert upper bracket into base bracket until you hear
a click from the spring ball. (See Figure 1)
Figure 1
PAGE 3 OF 20
SPECIFICATIONS CONTINUED
ASSEMBLY
Upper
Bracket
Spring
Ball
Base
Bracket
• To use alternating current, connect the product to a
power supply that is 120V.
• To use direct current, start the product directly. If the
fan fails to start, recheck whether the battery pack
needs to be charged.
2. To adjust fan angle, turn thumb screw (A)
counterclockwise to loosen fan head. Hold fan
head by handle (B) when adjusting the tilt. To secure,
turn the thumb screw clockwise until tight.
(See Figures 2-3)
Figure 2
Tight
A
Loose
Figure 3
130º
B
Loose
A
Tight
0º
B
90º
A
1223 IH-11066
Publicité
