Publicité
Les langues disponibles
Les langues disponibles
A luICE Turbo
3. Carefully slide the assembled drive back into the enclosure and do so as not to damage
any of the components. Fasten the four screws at the bottom of the casing to finish the
assembly.
4.2 Connecting the Hard Drive to the Computer
If the drive has been pre-installed and setup already, you can use the device straight out
of the box.
If you have installed the drive yourself and this is a brand new hard drive, you will have to
create a partition first and format the drive before it is recognized by the computer.
1. Turn on your computer and start the system.
2. Connect one end of the interface cable to the device and the other end to the
computer.
3. Plug-in the external power supply and turn the power switch to the ON position.
4. The system will automatically mount the drive. PC users can access it under My
Computer and Mac users on the desktop.
5. If the drive does not show up, check to make sure the device has sufficient power
and then use the Disk Management tool for PC users or the Disk Utility for Mac
users to prepare and format the drive. Be aware that formatting the drive will erase
all existing data!
6. For the safe removal of your drive, and to assure that no data is lost, always eject
the external drive from your system, before turning it off.
Manuel d'utilisation
Publicité
