storeva AluICE Turbo Manuel D'utilisation page 8

A luICE Turbo Manuel d'utilisation
4 System Set Up
4.1 Hard Drive Assembly
Your unit may come with a pre-installed hard drive. Before opening your enclosure, please
read the warranty carefully, as this could void it. Be careful not to damage any
components when installing the hard drive!
1. Remove the four screws located at the bottom of the case and pull out the HDD chassis
from the enclosure. It is not necessary to remove the vertical stand for the HDD
installation.
2. Install the hard drive and connect both the power and the SATA cable. Mount the drive
with the four screws from the bottom.