Publicité
Les langues disponibles
Les langues disponibles
EN
3.- Connect the antenna, the speakers and the AUX 2 input.
4.- Switch on the power supply to the amplifier.
CAUTION!: be careful when connecting the power. First disconnect the power supply to the automatic
circuit breaker to prevent shock.
5.- Install the amplifier in the wall box and attach the front panel.
An installation height of 140 cm from the ground to the base of the KS-AMP is recommended.
For wall mounting use the designated holes on the rear panel. Then attach the front panel. First fit the
tabs on the right side and then press on the left side until both parts are fully interlocked.
140 cm
NOTE: the amplifier is compatible with both round and square universal standard box. If you would require
performing a surface installation, you can make use of FONESTAR's optional mod. FONESTAR
DOT-BOX-B.
N
L
N
L
If the antenna cable
is shielded
If the antenna cable
is shielded
~100-240 V CA
~100-240 V CA
N
L
N
L
- 8 -
L
L
R
R
!
!
2
Publicité
