Publicité
Les langues disponibles
Les langues disponibles
5.
Press the lock switch and then squeeze
the trigger switch while engaging the
auxiliary-handle switch to turn on the hedge
trimmer
(Figure
7).
The trimmer stays on as long as the
auxiliary-handle switch is engaged and the
trigger is squeezed. You may release the
lock switch once the hedge trimmer is running
(Figure
7).
Rotating the Hedge Trimmer
Handle
1.
Press and hold the rotational lock button (A of
Figure
8).
2.
Rotate the handle 90° to the right or left
depending on desired cutting direction, then
release the rotational lock button to lock the
handle in the desired position (B of
Figure
Figure 8
Shutting Off the Hedge
Trimmer
To shut off the hedge trimmer, release the trigger,
auxiliary-handle switch, or both
least 5 seconds for the cutting blade to stop moving.
Whenever you are not using the trimmer or are
transporting the trimmer to or from the work area,
remove the battery pack.
Removing the Battery Pack
Press the battery latch on the tool to release the
battery pack and slide the battery pack out of the tool
(Figure
9).
8).
1. Battery latch
g308389
10
(Figure
7). Allow at
Figure 9
g308388
Publicité
