Bluetooth Module (Option); Bluetooth Configuration - Intel Clevo P370SM Guide Utilisateur Concis

Bluetooth Module (Option)

Make sure the Bluetooth module is turned on (and not in
Airplane Mode).
Bluetooth Driver Installation
Follow the instructions below:
WLAN and Bluetooth Combo (Intel)
1. Click Option Drivers (button).
2. Click 3.Install Combo BT Driver > Yes.
3. Click Next > Next.
4. Click the button to accept the license and click Next.
5. Click Next > Finish.
WLAN and Bluetooth 4.0 Combo (Third Party)
1. Click Option Drivers (button).
2. Click 3.Install Combo BT Driver > Yes.
3. Click Next.
4. Click Finish to restart the computer.

Bluetooth Configuration

Make sure the Bluetooth module is turned on (and not in
Airplane Mode) before configuration begins.
1. Turn your Bluetooth device (e.g. PDA, mobile phone etc.) on.
2. Make the device discoverable (to do this check your device
documentation).
3. Go to the Charms Bar.
4. Select Settings and then click Change PC Settings.
5. The Devices item in PC Settings will appear.
6. Click Add a Device.
7. Double-click the device you want to pair with the computer.
8. On first connection the computer will provide you with a pairing
code to be entered onto the device.
9. Enter the code into your Bluetooth enabled device and click Yes
on the computer to complete the pairing.
10. You need to either use Airplane Mode, or to turn the
Bluetooth module off aboard aircraft.
31