Hisense FV298N4ACE Mode D'emploi page 41

19
Note: 1. You need move hinge axis from
hole ① to ② , move adjustable bottom
feet part from hole ③ to ④ before
transfer.
7. Set the door into its new place making
sure the pin enters the bushing at the
lower frame section.
8. Replace the lid by fitting the upper
hinge core into the upper door's hole,
securing it with the 3 screws.
9. Put the screw hole cover and upper
hinge cover（left）as follow diagram.
10. Switch the handles from the left to the
right（only for the model with handles）.