Publicité
Les langues disponibles
Les langues disponibles
Installation
6. Lift the rear of the cooktop and slide it to the rear of
the range until the tabs clear the console.
q
q
w
w
7 Removing the Cooktop
Cooktop
q
7. Lift the cooktop out of the range and place it on a flat,
secure surface.
8 Sliding the Range into the Cabinet Opening
8. Gently push the range into the cabinet opening.
9. Verify the range is level (side to side, front to rear).
8
Range
w
7.2 Connecting the Gas Lines
q
q
w
w
9 Placing the Gas Line
Gas Regulator
q
1. Turn off all gas to the RV.
2. Connect a gas supply line to the gas regulator in the
upper-left rear corner of the cooktop.
I
All openings in the cabinetry around the gas supply
line must be closed at the time of installation.
7.3 Connecting the Electrical
I
Applies to the CRG 3335 model only.
1. Turn off all power to the RV.
2. Make the connections. See "Wiring Diagram" on
page 4.
– Connect the red wire to the positive 12 VDC
power circuit.
– Connect the black wire to the negative 12 VDC
power circuit.
CRG 3000 Series Range
Gas Supply Line
w
EN
Publicité
