Publicité
Les langues disponibles
Les langues disponibles
8
Assembly Instructions (continued)
9
Store Table Insert
Hang the table insert on the inner side of door.
W WARNING: NEVER place table insert onto outdoor fire pit while
in use.
W WARNING: NEVER take out and place table insert onto outdoor
fire pit while the outdoor fire pit is still hot.
OPTIONAL ITEM SOLD SEPARATELY
10
Place Lava Rocks
W CAUTION: When switching from fire glass, remove all fire
glass before placing lava rock.
W CAUTION: Do NOT dump lava rocks out of package. Carefully
place lava rocks by hand so dust does not clog burner.
W CAUTION: Use only Mr.Bar-B-Q Products LLC. factory-
authorized lava rock. The use of any lava rock that is not
factory-authorized can be dangerous and will void your
warranty.
W CAUTION: Do NOT cover igniter cover.
Note: Lava rocks should be 0 .8-2 .0 in . (2-5 cm) long . Approx . 6 .6 lb (3 kg) of lava
rocks are needed .
LP Gas Outdoor Fire Pit
Model No. GAD15287SP
Installing LP Gas Tank
To operate, you will need one precision-filled standard grill LP gas
tank with external valve threads .
W CAUTION: LP gas tank must be properly
disconnected and removed prior to moving this
outdoor fire pit.
Inserting LP Gas Tank
W WARNING: Make sure LP gas tank valve is closed.
1 .
Open door .
2 .
Make sure the control knob is in the " OFF" position (Figure 3) .
3 .
Loosen LP gas tank retainer bolt by turning counter-clockwise .
4 .
Place precision-filled LP gas tank upright into hole in outdoor fire pit base so the tank valve
is facing the gas line connection .
5 .
Secure tank by turning LP gas tank retainer bolt clockwise until tight .
6 .
Close door .
Connecting LP Gas Tank
1 .
Make sure the control knob is in the " OFF" position
(Figure 3) .
2 .
Before connecting, be sure there is no debris caught in the
head of the LP gas tank, head of the regulator valve or in the
head of the burner or burner ports .
3 .
Connect regulator/hose assembly to tank by turning knob
clockwise until it stops .
4 .
Perform leak check per "Checking for Leaks" section .
Disconnecting LP Gas Tank
1 .
Make sure the control knob is in the " OFF" position
(Figure 3) .
2 .
Before disconnecting, make sure the LP gas tank valve is
"CLOSED ."
3 .
Disconnect regulator/hose assembly from LP gas tank by
turning knob counterclockwise until it is loose .
W CAUTION: LP gas tank must be properly
disconnected and removed prior to moving
this fire pit.
4 .
Place the protective cap cover on the LP tank and store
the tank outdoors in a well ventilated area out of direct
sunlight .
20 lb
9 Kg
12.2 in. / 31 cm
Publicité
