V-TAC VT-6211 Mode D'emploi page 6

DESCRIPTION OF PARTS
CHARGING THE SPEAKER
The speaker has built-in rechargeable battery. When the battery is drained out, speaker
would turn OFF automatically. Please recharge the battery every time it drains out.
Plug the Micro USB end of the included USB charging cable into the charging port.
Plug the other end into a USB port on your computer or other devices made for USB
charging. Red LED Light illuminates indicating that the device is being charged.
It takes 3 - 4 hours to fully charge the speaker. Once the speaker is fully charged, LED Light
would turn OFF.
It is recommended to fully charge the speaker before its first use.
TURNING ON/OFF THE SPEAKER
Before Turning ON the speaker, please ensure that it is fully charged.
Press and hold the ON/OFF button for 2-3 seconds to turn on/off the unit.
TWS FUNCTION
It is possible to use two copies of this speaker, paired together, to benefit from a stereo sound.
To do this, turn on both speakers, then press the M button on one of them once.
The two speaker will connect to each other.
You can then pair your device with the stereo unit by following the procedure below.
Ensure that both speakers are spaced less than 10 meters
1. LED Light
2. Skip Forward /Volume Increase + Button
3. ON/OFF/ Play/Pause/Phone /TWS Button
4. Skip Backward /Volume Decrease - Button
5. LED Indicator
6. Auxiliary Port
7. Built-in Microphone
8. Charging Port
9. LED Light Button
10. LED Light Increase Button
11. LED Light Decrease Button
5
ENGLISH