Output Wiring Variants - Knick VariTrans P2900 P2 Série Manuel Utilisateur

Output Wiring Variants

Stromausgang aktiv Current output, active
Voltage output
The current measurements presented here
are for verifying the output current without
opening the output circuit. Terminals 3.1 and
3.3 are the monitor output.
The monitor output can be used for non-
disruptive testing of the output current by
temporarily connecting a multimeter (to the
test jacks), or permanently connecting an
isolated display unit.
An open circuit in the monitor output, e.g.,
because of a broken wire, will not result in
impairment or failure of the primary current
output.
Legend
Test jack
Terminal
Optional voltage
measurement
Optional current measurement
(Only DC currents can be correctly
measured)
55