AYR Int LOCK PRO Manuel D'utilisation page 69

PROBLEM
No alarm sounds
Manual opening or
closing does not work
Does not reset the de-
vice
Bad installation.
Faulty configuration of alarm activation.
Bad choice of alarm sensitivity.
Door prevents vibration on the device (try int_
LOCK outside the door).
Check the state of the battery.
Depending on the action, the door must be clo-
sed.
Follow the opening system indicated on the pai-
ring panel.
Check the condition of the battery.
Strictly follow the reset steps indicated in the ma-
nual.
CAUSE
EN
69