Publicité
Les langues disponibles
Les langues disponibles
COLD AIR FUNCTION
OVERHEAT PROTECTION SYSTEM
This heater is equipped with an internal High limit Switch which causes the unit to
stop operating in the event the internal temperature exceeds normal operating
temperatures.
Turn the selector knob on « O » and unplug the appliance. Let the appliance cool
down for about 10 minutes before using it again.
If this overheat protection system stops the appliance after a short while, there is
certainly a failure. Unplug the appliance and bring it to the manufacturer, its
service agent or a qualified engineer.
Please remember that all repairs should only be carried out by a qualified
engineer. Improper repairs may place the user at risk of harm.
TIP-OVER SWITCH
This heater is equipped with a "tip over switch" safety feature which automatically
shuts off heating element if heater is not in an upright position.
Switch off the product and unplug it. Plug it again, place it on a stable surface and
switch it on.
CLEANING
Unplug the appliance. Wait for it to cool down completely.
Clean the surface of the appliance with a soft, damp cloth.
Never use abrasive products.
If you wish to use this appliance as a fan, choose the cold
air function and settle the thermostat.
Publicité
