innohaus ABC 30 Mode D'emploi page 10

• Please note that when inflating, the functions
of the limb in question may be impaired.
• Do not place the cuff over wounds as this may
cause further injury.
• The accuracy of any blood pressure
measurement with this device can be affected
by a multitude of causes. Some can be
avoided some have to be accepted at the time
of measurement. Speak with your physician
about possible causes affecting your blood
pressure.
• Do not inflate the cuff unless wrapped around
wrist.
• Do not touch the unit and cuff and/or press
any buttons when measurement is in progress,
except for stopping the measurement. Doing
so may cause incorrect readings.
• The use of the device may be limited in the
presence of electromagnetic disturbances.
This could result in issues such as error
messages or the failure of the display/device.
• Avoid using this device directly next to other
devices or stacked on top of other devices, as
this could lead to faulty operation. If, however,
it is necessary to use the device in the manner
stated, this device as well as the other devices
must be monitored to ensure they are working
properly.
• The use of accessories other than those
specified or provided by the manufacturer
of this device can lead to an increase in
electromagnetic emissions or a decrease in
the device's electromagnetic immunity; this
can result in faulty operation.
• Failure to comply with the above can impair
the performance of the device.
NOTICE
• The blood pressure monitor is made up of
precision electronic components. Accuracy
of readings and the instrument's service life
depend on careful handling. Protect the unit
against hard knocks (e.g. dropping the unit),
10