Publicité
Les langues disponibles
Les langues disponibles
5. Inicial configuration
5.1 Configuration wizard
The first time you turn on the display, a wizard will guide you to configure the main settings of your videophone.
Please follow these steps before using the device.
Create Password
Please enter a new password
Please enter the password again
Create Password
Create Password
Password length 8 to 16 characters
Please enter a new password
Please enter a new password
Please enter the password again
Please enter the password again
Password length 8 to 16 characters
Password length 8 to 16 characters
Wizard-Language 1/4
English
P
Deutsch
Wizard-Language 1/4
Wizard-Language 1/4
English
English
Italiano
P
P
Français
Deutsch
Deutsch
Italiano
Italiano
Français
Français
Wizard-Network 2/4
DHCP
Local IP
Subnet Mask
Wizard-Network 2/4
Wizard-Network 2/4
DHCP
DHCP
Gateway
Local IP
Local IP
Subnet Mask
Subnet Mask
Previous
Gateway
Gateway
Previous
Previous
Wizard-Settings 3/4
Indoor Station Type
Floor
Room N°
Wizard-Settings 3/4
Wizard-Settings 3/4
Indoor Station Type
Indoor Station Type
Floor
Floor
Room N°
Room N°
Previous
OK
OK
OK
Next
Skip
Next
Skip
Next
Skip
192.168.1.26
255.255.255.0
192.168.1.1
192.168.1.26
192.168.1.26
255.255.255.0
255.255.255.0
Next
Skip
192.168.1.1
192.168.1.1
Next
Skip
Next
Skip
Indoor Station
Indoor Station
Indoor Station
Next
Skip
Step 1
Turn on the screen. An activation page will appear. Choose an ad-
ministrator password for later access to the configuration menu.
Press OK to activate it.
ATTENTION: Please write down your password
somewhere! (at the back of the screen). You will be
asked for it every time you want to change a setting.
We recommend that you create a strong password of your choice
(using a minimum of 8 characters, including at least three types
of the following categories: uppercase letters, lowercase letters,
numbers and special characters) to increase the security of your
product.
Password: ....................................
Step 2
Select your language
(This step will have to be reconfirmed later by going through the
configuration again so that both units have the same language).
Step 3
Configure a local network between the interior and exterior units.
We advise that you do not select the DHCP option and you stick to
the default settings.
1
1
1
1
1
1
Publicité
