Igloo VERSATEMP 28 Manuel D'utilisation page 6

Failure to follow these precautions may
result in fire, electrical shock and/or injury
to persons.
Versatemp™ Cooler
1. WARNING: Keep ventilation openings, in the
appliance enclosure or in the built-in structure, clear
of obstructions.
2. WARNING: Do not use mechanical devices or other
means to accelerate the defrosting process, other
than those recommended by the manufacturer.
3. WARNING: Do not damage the refrigerant circuit.
4. WARNING: Do not use electrical appliances
inside the food storage compartments of the
appliance, unless they are of the type recommended
by the manufacturer.
5. Do not store explosive substances such as aerosol
cans with a flammable propellant in this appliance.
6. WARNING: When positioning the appliance, ensure
the supply cord is not trapped or damaged.
7. WARNING: Do not locate multiple portable
socket-outlets or portable power supplies at the
rear of the appliance.
8. Suitable for camping use.
9. Keep the unit out of rain and prevent water from
entering the air vents and motors.
10. Never use extension cords with the Versatemp.
11. Use only the Versatemp DC power cable with a
DC power source (12V automobile outlet). Never
attempt to connect the Versatemp to AC current
without the use of the optional Igloo
Use of non-approved DC cables or AC converters
may hinder the unit's performance and will void
its warranty.
12. Do not use ice in the Versatemp
cooler. Never fill the Versatemp
with liquids that aren't sealed
in containers. If liquids get into
the fan and motors, they can
cause corrosion and impaired
unit performance.
13. Always ensure that the
Versatemp cooler is operating
in an area with adequate
ventilation. Never cover the air
vents, air intake or fan areas
of the cooler with any objects.
Never operate the Versatemp in
an enclosed area or car trunk/
boot. Never sit on the Versatemp
thermoelectric cooler.
14. Avoid contact with interior moving or metal parts
while the cooler is in use. Electrical shock or burns
may result.
15. Always unplug the power source before cleaning.
16. Do not spray liquid cleaner, water or other
substances into the air vents.
17. Maintain the unit in a clean environment with good
air flow. Avoid pet hair, dirt or dust that may impair
the unit's operation and void its warranty.
18. Do not place any part of the Versatemp into
a dishwasher.
19. Do not build the Versatemp into a cabinet,
counter or other area unless adequate ventilation
is available.
SAFETY PRECAUTIONS
20. Always use proper lifting techniques when
21. Avoid dropping the Versatemp thermoelectric
22. Caution: Hold lid when loading or unloading cooler or
DC Operation
1.
2. Do not operate the Versatemp for more than two
3. If the engine is switched off for long periods
AC converter.
®
4. If the Versatemp is run from a secondary
Power Cord/Plug
1.
2. Do not cut the power cord or modify it in any way.
3. Only use the Igloo power cord supplied with the
4. Should the 7.5-amp fuse in the DC cable require
5. Do not allow the cord to become tangled or crimped
6. To order replacement cords, go to IglooCoolers.com.
transporting the Versatemp filled with food and
beverages. When possible, empty contents from the
Versatemp before lifting or moving.
cooler, as this could cause damage to the internal
electronic components.
use handle to prop lid open.
When operating in the DC mode, the Versatemp
will not automatically shut off when the vehicle
battery voltage is low. This can drain a battery if left
unattended for long periods of time.
hours when the vehicle engine is off. On average,
these coolers draw between 4.5 amps to 6.5 amps
of electricity per hour. While an average vehicle
battery is rated at 48-60 amps/hr., age will
affect its performance. The unit can be operated
continuously while the vehicle is running.
(overnight), it is important to unplug the Versatemp
from its power source to avoid battery drain.
battery, periodically have the battery checked for
available amps.
When turning off the Versatemp, never pull the
cord to disconnect from the power source. Always
hold the plug – not the cord – then gently pull to
disconnect. Avoid touching the tip of the DC plug, as
it may be hot.
Doing so may cause fire or shock and will invalidate
the warranty.
Versatemp. Failure to do so may cause fire or shock
and will invalidate the warranty.
replacement: unscrew the tip of the plug; remove
the used fuse; insert the new fuse; and reattach the
tip of the plug. Never use greater than an 7.5-amp
fuse and ensure that the fuse is approved by the
appropriate electrical certification agencies in the
country of use. See fuse assembly diagram on
page 7.
by heavy objects.