Publicité
1. Introduction
Statement
Before transporting, storing, installing, operating, using, maintaining the inverter, read this
document, strictly follow the instructions provided herein, and follow all the safety instructions
on the equipment and in this document.
The Danger, Warning, Caution, and Notice statements described in this document do not
cover all the safety precautions. You also need to comply with relevant international, national,
or regional standards and industry practices. The Company shall not be liable for any
consequences that may arise due to violations of safety requirements or safety standards
concerning the design, production, and usage of the equipment.
The inverter shall be used in an environment that meets the design specifications. Otherwise,
the equipment may be faulty, malfunctioning, or damaged, which is not covered under the
warranty. The Company shall not be liable for any property loss, personal injury, or even death
caused thereby.
Comply with applicable laws, regulations, standards, and specifications during transportation,
storage, installation, operation, use, and maintenance.
Do not perform reverse engineering, decompilation, disassembly, adaptation, implantation,
or other derivative operations on the device software. Do not study the internal
implementation logic of the equipment, obtain the source code of the equipment software,
violate intellectual property rights, or disclose any of the performance test results of the
equipment software.
.2.
The Company shall not be liable for any of the following circumstances or their consequences:
●
The inverter is damaged due to force majeure such as earthquakes, floods, volcanic
eruptions, debris flows, lightning strikes, fires, wars, armed conflicts, typhoons, hurricanes,
tornadoes, and other extreme weather conditions.
●
The inverter is damaged due to your or a third party's negligence, intentional breach, gross
negligence, or improper operations, or other reasons not related to the Company
●
The inverter is damaged due to storage conditions that do not meet the requirements
specified in the product document.
●
The inverter is installed or used in environments that do not comply with international,
national, or regional standards.
●
The inverter is installed or used by unqualified personnel.
●
You fail to follow the operation instructions and safety precautions on the product and in
the document.
●
You fail to prepare materials and tools that comply with local laws, regulations, and related
standards.
●
You remove or modify the product or modify the software code without authorization.
●
The inverter is operated beyond the conditions specified in this document.
●
You or a third party authorized by you cause the equipment damage during transportation.
1. Introduction
.3.
Publicité
