Melchioni Family MF 2109P40 Manuel D'instructions page 9

5. Screw the complete base with the screws (17) unscrewed previously.
6. Loosen the body fixing screw (13) and insert the upper body on the extension rod (15). Tighten
the screw (13) to secure it.
7. Unscrew the rear grille fixing ring (4) from the motor shaft (8) by turning it counterclockwise.
8. Insert the rear grill (5) on the motor shaft (8) by positioning the handle on the back upwards
and making the two interlocking hooks coincide on the vertical holes of the rear grill. Screw
the fixing ring nut (4) by turning it clockwise.
9. Insert the fan (3) on the motor shaft (8) and fix it using the appropriate fixing ring (2).
10. Open the front grille clips (1) and position it correctly on the rear grille (5).
11. Close the clips and insert the safety grille screw.
E. HOW TO USE
• O: Switch off the fan
• SPEED SELECTION: 1 low speed - 2 medium speed - 3 high speed
• SWING: Press and pull out the rocking button to turn the function on and off
• VERTICAL INCLINATION: It is possible to orient the fan head vertically. It is sufficient to adjust the
fan head by gently moving it up or down according to the desired angle.
• HEIGHT ADJUSTMENT: Loosen the height adjustment knob (7), and adjust the fan to the desired
height. Tighten the knob again once the rod has been adjusted.
This operation must always be performed with the fan off.
F. CARE AND CLEANING
This appliance requires little maintenance and contains no user serviceable parts. Do not try to fix
it yourself. Refer it to qualified service personnel if servicing is needed.
The fan is permanently lubricated and will not require additional lubrication for the life of the fan.
TO CLEAN: Before cleaning, turn fan off and unplug from electrical outlet. Wipe off excess dust
with a lint-free cloth. To ensure adequate air circulation to the motor, keep vents located at the
rear of the motor housing free from dust accumulation. A vacuum cleaner hose can be used to
clean these vents. Do not immerse fan in water or any other liquid.
TO STORE: Make sure to disassemble and clean the fan before storing. Retain the original
packaging for the purpose of storing the fan. Always store fan in a dry place. Never store it while it
is still plugged in. Never wrap the cord tightly around the fan, and do not put any stress on the cord
where it enters the fan housing, as it could cause the cord to fray and break.
G. TECHNICAL DATA
Power: 40W
Power supply: 220-240V~50Hz
Dimensions: 64x64x125 cm
Net weight: 2,19 kg
H. CONFORMITY OF THE PRODUCT
The producer Melchioni Spa declares that the product Stand fan-Model MF 2109P40 (Cod.
118620039) is in compliance with Directive 2014/30/EU of the European Parliament and of the
8