Publicité
84 acin: Source V too low stop,
85 acin: Source V too high stop,
86 acin: Source freque too low,
87 acin: Source freque too high,
88 acin: Source V no voltage,
Sortie défectueuse (hors tolérances, autre raison que surcharge)
111 out: IGBT driver alarm,
112 out: non-défini 112 (introduit par erreur mais sans conséquence)
113 out: Driver not ready,
114 out: Driver fault,
116 out: IGBT error,
117 out: Vout pi2 error,
118 out: Vout mpi2 error,
120 out: Backfeed error,
121 out: Too many start
Surcharge
103 out: Overload,
104 out: power derating,
105 out: Vout too low,
106 out: overload too long,
115 out: Over-current,
132 monitoring: System saturated,
By-pass On
129 out: MBP engaged,
By-pass défectueux
(non-applicable)
Sortie manuelle (off)
16 module: Off (off distant),
17 module: Off (interrupteur frontal),
119 out: Off (bus)
Arrêt manuel ASI (ASI complète ?)
(non-applicable)
Défaut chargeur
418 battery: Charging fail
57
– ASI modulaire Agil – Manuel d'installation – v7.3
Publicité
