Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY INSTRUCTIONS
7
G
Place power washer unit (F) into position on the lower
frame (G).
9
K
N
1
Pull back on collar at one end of high pressure hose (N).
Push firmly to connect hose to spray gun (K). Twist collar
to secure. Confirm hose is locked into spray gun by slightly
pulling on them. The hose is now securely attached to
spray gun.
cih.cnhpowerequipment.com
F
2
3
N
8
G
F
Pull upward on latches that are located on sides of lower
frame (G). Once upper latch is flush with the lower lip,
push down until lower latch clicks into place.
10
1
Unlocked
Locking Spray Gun (before Lance installation) To lock
trigger of spray gun (K), point gun away from you and turn
dial to lock ("3" and "9" position). Squeeze or pull trigger
to make sure it is locked. Always leave in locked position
when not in use. This ensures the gun is in "safe" mode
until it is ready for use. Turn dial to unlock ("12" and "6"
position) to release spray gun trigger.
Note: The trigger lock prevents trigger from being
accidentally engaged.
K
Locked
9
Publicité
